The SPL PROMIKE
Specifications:
Frequency
range: 15Hz - 40kHz ±0.1dB
Overall range: 10Hz - 100kHz ±0.5dB
EIN: 126.6 dBm/dBu
Total Harmonic Distortion (THD):
0.064% @ -60dBu to 0dBu
0.015% @ -30dBu to 0dBu
0.002% @ -20dBu (60dB amplification)
Signal-to-noise ratio: -60dB @ 72dB amp
-69dB @ 60dB amp
-77dB @ 50dB amp
-81dB @ 40dB amp
-83dB @ 30dB amp
Input level (nominal): +6dB
Input impedance: 200Ω to 1.2kΩ
Input connections: balanced XLR3F x 2
stereo balanced XLR7F x 1
Headroom before clip: +25.72dB
Output level (nominal): +6dB
Output impedance: <600Ω
Output connections: balanced XLR3M x 2
unbalanced ¼" jack & RCA phono x 2
Power requirements: 100-120V or 220-240VAC
Power consumption: 15W
Dimensions: 482(w) x 44(h) x 237mm(d)
1u rackmount
Weight: 2.7kg |
 SPL's PROMIKE is a dual channel,
high definition microphone preamplifier designed for recording applications that demand a
natural, clean and uncoloured sound. The PROMIKE offers a preamp gain of up to +72dB and
the stable phantom power supply drives quality capacitor mics extremely noiseless while
preserving a very high CCMR. The PROMIKE's preamp circuitry is built around the highly
acclaimed SSM 2017 semiconductor from Analog Devices, offering a common mode rejection
better than 90dB for good resistance to hum and RF interferences, plus a very low noise,
very accurate signal path. The 48Vphantom power is supplied by a separate power supply to
that running the audio circuitry.
Features:
- Input gain control -22dB to +72dB
- phase switch, -35dB pad switch, 48V phantom power switch
- variable 35Hz to 220Hz high pass filter (2nd order
Butterworth)
- variable 2.6kHz to 22kHz low pass filter (2nd order
Butterworth)
- Metering is via a 20 segment LED PPM meter display on each
channel.
- Outputs: balanced XLR, unbalanced ¼" jack & RCA
phono
- Servo Drive technology, Double Ground Shielding and direct
connection for stereo microphones.
- Frequency response 20Hz to 90kHz
- Signal to noise ratio -126dB
Price
to rent
Price
to buy
|