GB Audio. Scotland's sound system design company hire sale installation service. News FREE technical information library, rental inventory, product datasheets, special offers, reviews, recent events. audio sound hire sale rental installation power amp amplifier recording playback loudspeaker speaker FX effects processor radio mic microphone headphone mixer mixing desk console control instrument backline stands rigging theatre concert festival Edinburgh Scotland UK GB Audio. Scotland's sound system design company hire sale installation service. News FREE technical information library, rental inventory, product datasheets, special offers, reviews, recent events. REV5   

DATA
SHEET

Production: Obsolete
Hire stock: Yes
New stock: No
Used stock: Yes
 Go Back one page
Yamaha Studio reverb

Full 20 Hz to 20 kHz frequency response for superior sound REV5 sampling frequency has been increased to 44.1 kHz to provide full, accurate frequency response from 20 Hz to 20 kHz. This extra margin of reproduction precision means exceptionally clean, "transparent" effect sound and a broader control range.
Expanded control parameters and 60 user memory locations
REV5 Yamaha has provided an extremely broad range of control over the reverb sound, allowing the operator to precisely simulate almost any desired effect. This same expanded control capability applies to the REV5's early-reflection, delay and echo, modulation, pitch change and combination effects as well.
Independent digital program EQ in addition to master EQ
In addition to a master three-band sweep equalizer which can be used to shape the overall response of the REV5 effect signal, individual EQ settings are possible for each effect program.
Midi program selection and dump capability
The REV5 features a MIDI In terminal which allows MIDI selection of effect programs, and a switchable MIDI Thru/ Out terminal which serves dual functions. When switched to Thru, it functions as a standard MIDI Thru terminal, re-transmitting MIDI data received at the MIDI In terminal. This facilitates the "daisy -chaining" of MIDI devices. When switched to Out, user-edited programs stored in internal RAM can be dumped to a MIDI data recorder or other data storage device.
Switchable input/output levels
As an extra touch of convenience the REV5's electronically balanced input and output terminals can be switched to match -20 dBm or +4 dBm line levels- providing compatibility with a broader range of sound equipment.

Yamaha REV5 programmable studio reverb and digital effects processor
Effect Freq. Response 20 Hz - 20 kHz
Dynamic Range Reverb: >78 dB Delay: >84 dB
THD <0.03% @ 1kHz, max. level
Analog Equalizer Low: +/-15 dB, 50 Hz- 700 Hz Mid: +/-15 dB, 350 Hz - 5kHz HI: +/-15 dB, 2 kHz - 20 kHz
Input/ Number of Channels Elec. balanced x 2 (XLR type) Elec. balanced x 2 (TRS phone)
Input/ Nominal Level -20/ +4 dBm, switchable
Input/ Impedance 10k-ohms
Input/ Level Control Rotary, continuous
Input /Level Monitor 8-segment LED
A/D Conversion Number of Channels 1
A/D Conversion Sampling Freq. 44.1 kHz
A/D Conversion Quantization 16 bits
D/A Conversion Number of Channels 2
D/A Conversion Sampling Freq. 44.1 kHz
D/A Conversion Quantization 16 bits
Output/ Number of Channels Elec. balanced x 2 (XLR type) Elec. balanced x 2 (TRS phone)
Output/ Nominal Level -20/ +4 dBm, switchable
Output/ Impedance 600 ohms
Presets (ROM) 1 -30, 91-99
User Memory (RAM) 31-90 (Battery Backup)
MIDI Control Program selection by MIDI program change number. MIDI base key selection for pitch change programs. Bulk dump and load.
Front Panel/ Controls Input Level, EQ (LO Freq and Level,Mid Freq and Level, Hi Freq and Level), Mixing, EQ On/Off, Mono/Stereo
Front Panel/ Keys Direct recall (REV 1/-31-, REV2/-32-, REV3/-33-, REV4/-34, -ER1/-35-, ER2/-36-, Others/-37-), User Memory, Parameter, Level, Initial Delay, 1ST Ref, EQ, EQ On, Up Key, Down Key, 10-key numeric pad, Clear, Memory, Store, Recall/ Enter, - , Mute, INT Param, Utility, Bypass
Front Panel/ Display 16 char. x 2 line LCD 2-digit 7-segment LED
Power Supply UK Model:220-240 VAC, 30W
Dimensions (W x H x D) 480 x 90 x 343mm (18-7/8" x 3-1/2" x 13-1/2") (2u)
Weight 5.5kg (12.13 lbs.)
 

Price to rent          Price to buy         

top / Home / Dry Hire / System Hire / Sales / Accessories / A-Z / Installation / News / Reference Library / Clinic / Contact