GB Audio. Scotland's sound system design company hire sale installation service. News FREE technical information library, rental inventory, product datasheets, special offers, reviews, recent events. audio sound hire sale rental installation power amp amplifier recording playback loudspeaker speaker FX effects processor radio mic microphone headphone mixer mixing desk console control instrument backline stands rigging theatre concert festival Edinburgh Scotland UK GB Audio. Scotland's sound system design company hire sale installation service. News FREE technical information library, rental inventory, product datasheets, special offers, reviews, recent events. GQ1031B    

DATA
SHEET

Production: Obsolete
Hire stock: No
New stock: No
Used stock: No
Yamaha graphic equaliser

Applications
Acoustic Tuning: Use graphic equalization to fine tune any sound system to match the acoustics of a studio, concert hall, or any other sound environment. It can also be utilized to compensate for serious acoustic irregularities found in rooms that were not designed for music listening and keep properly designed studios or halls at their optimum sound level.

Feedback Control: In situations where restrictions make a feedback proof setup impossible, Yamaha graphic equalizers can be used to reduce the gain of problem frequencies, thus minimizing the possibility of sudden outburst of feedback that can ruin a performance.

Sound Shaping : Yamaha graphic equalizers are also creative tools that can shape the tone of an instrument or voice to achieve a better blend in the mix. When added to reverb, EQ can electronically simulate a wide range of acoustic environments.

Noise Suppression: Graphic equalization can effectively minimize tape hiss, stage rumble, wind noise, microphone popping, excessive sibilance, and other sources of unwanted noise.

Yamaha GQ1031mono 31 band graphic equaliser

Frequency response: 20 Hz - 20 kHz, +/- 1dB @ +4dB* 600 ohms
THD: < 0.005% (THD+N), 1kHz @ 0dB
Hum & noise: < -100dB @ 1HF-A, 0dB
Maximum voltage gain: 0dB input level at max.
Centre frequencies: 31 band (1/3 octave) 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20kHz
Range: ±12dB

Input Impedance: 15k ohms
Source Impedance: 600-ohm Lines
Nominal input level: switchable -20dB or +4 dB (1.23V)
Maximum input level before clipping: +24 dB (12.3V)
Input connectors: XLR-3-31 Type & ¼" Jack (TRS)

Output Impedance: 150 Ohms
Load Impedance:
600-ohm Lines
Nominal output level: switchable -20dB or +4 dB (1.23V)
Maximum output level before clipping: +24 dB (12.3V)
Connectors: XLR-3-32 Type & ¼" Jack (TRS)

Indicators: Red LED shows when EQ is on. Red LED shows power on. Red LED turns on when post-EQ signal reaches the level 3 dB below clipping. 
Power requirements: AC230V 50Hz
Dimensions: 480 x 47 x 230mm (1u)
Weight: 3.2kg

See full specs and application notes on Yamaha's own datasheet

Hire / Sales / A-Z / Installation  / Reference Library / Contact