Modulation: FM, stereo
Carrier frequencies: 2.3 / 2.8mHz ą 5kHz
AF frequency response: 40 - 15kHz
S/N ratio: 60 dB A rms
THD: <2% at 120bD
AF input voltage: 100mV - 20V (line level)
Line input: 3.5 mm stereo jack flying lead 2m
Mic input: 2.5 mm stereo jack flying lead 2m
Charging time for battery: approx. 4 h
Charging time (spare battery): approx. 10-12 h
Power supply: 24 V DC via NT810UK mains unit
Weight approx: 94 g (without battery)
Dimensions: 150(W) x 47(H)mm
Receiver option: RI810 stethoset:
40 - 15kHz
Power supply 2.4 V battery BA 151
Operating time: approx. 4 hrs per battery
Max. SPL: >125 dB
Dimensions: 230(H) x 125(W) x 25(D)mm
DDA - Disability Discrimination Act
The SET810 is a wideband infra-red modulator with an integral
radiator for high quality stereo operation. Due to its compact size and
relatively low radiating power, the S180 modulator/radiator is an ideal
choice for smaller or medium-sized rooms up to 60mē, for covering recesses
or for applications which require transmission of audio information to well
defined zones, e.g. in meeting rooms, small offices, living rooms, etc.
One transmitter can be picked up by several
TI810 transmitter & RI810 receiver
PROBLEM SOLVING TIPS:
Volume turned to maximum
Signal is missing. Check connection
on headphone but no signal to transmitter.
If volume can be adjusted at the headphone socket,
adjust volume upward until
transmitter is activated.
Receiver may not be operable.
Receiver may not be in the range of reception.
Sound is distorted ...
Battery is completely discharged.
Recharge it immediately!
Volume adjusted at the headphone
socket may be too high.
Sound is slightly noisy ...
Transmitter is not positioned in
optimum way or connectors are not
secured tightly; reception is obstructed.
list Compare to