FEATURES
• Genuine period microphone housing
• Integral sprung suspension mount
• Fully-functioning theatrical prop
• Modern
condenser capsule
TECHNICAL SPECIFICATIONS
ELEMENT Fixed-charge back plate permanently
polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 30-20,000 Hz
LOW-FREQUENCY ROLL-OFF 150 Hz, 6 dB/octave
OPEN CIRCUIT SENSITIVITY – 46 dB (5.0 mV) re 1V at 1 Pa*
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 130 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL) 95 dB, 1 kHz at Max SPL
SIGNAL TO NOISE RATIO 65 dB, 1 kHz at 1 Pa*
BATTERY TYPE Use only "leakproof" AA/UM3 1.5V battery
BATTERY CURRENT 1 mA typical
BATTERY LIFE 1000 hours (alkaline battery)
PHANTOM POWER REQUIREMENTS 5-52V DC, 2 mA typical
SWITCH Off, on-flat, on-roll-off (battery) On-flat
WEIGHT (LESS CABLE AND ACCESSORIES)
MICROPHONE 2.5 grams
POWER MODULE 147 grams
DIMENSIONS MICROPHONE 20.5 mm long, 10.0 mm diameter
POWER MODULE 83.0 mm H x 63.0 mm W x 22.0 mm D, not including clip
OUTPUT CONNECTOR integral 3-pin XLRM-type (POWER MODULE)
Weight . . . . . . . . . .. . . . . . . . 460g (excluding stand)
Dimensions (mm) . . . . . . . . . . .165 dia x 193(h) x 42(d)
HISTORY
This mic is believed to have been
made in the 1930s by W. Bryan Savage Ltd of London. Originally a carbon granule microphone, this unit is
now fitted with a modern condenser capsule. |
|
