|
DATA |
Production: | Obsolete |
| Hire stock: | Yes | |
| New stock: | No | |
| Used stock: | No |
Technical Data
System
Modulation: FM, stereo
Carrier frequencies: 95/250kHz ą 25kHz FM
AF frequency response: 30 - 18kHz
S/N ratio: 60 dB A rms
THD: <0.8%
Coverage: 40mē
Transmitter: S180:
AF input voltage: 60mV - 20V
Audio input: 3.5 mm stereo jack flying lead 2m
Charging time for battery: approx. 4 h
Charging time (spare battery): approx. 10-12 h
Power supply: 24 V DC via NT20-1UK mains unit
Weight approx: 140 g (without battery)
Dimensions: 120 x 25 x 90mm
Receiver option: HDI450 headphone:
Frequency response:
30 - 22,000 Hz
THD: < 1 %
S/N ratio: typ. 60 dB (A)
Operating time: approx. 8 hrs. per battery
Power supply: BA90 "accuplug" rechargeable battery
Max. SPL: 103 dB
Volume control plus on/off switch
Weight: 160 g
DDA - Disability Discrimination Act compliant
The S180 is a wideband infra-red modulator with an integral radiator for high quality stereo operation. Due to its compact size and relatively low radiating power, the S180 modulator/radiator is an ideal choice for smaller or medium-sized rooms up to 40mē, for covering recesses or for applications which require transmission of audio information to well defined zones, e.g. in living rooms, small offices, meeting rooms, etc. The headset is comfortable for listening over long periods an doffers superior audio quality.
|
|
|
PROBLEM SOLVING TIPS:
Volume turned to maximum Signal is missing. Check connection
on headphone but no signal to transmitter. If volume can be adjusted at the headphone socket,
adjust volume upward until
transmitter is activated.
Receiver may not be operable.
Receiver may not be in the range of reception.
Sound is distorted ... Battery is completely discharged.
Recharge it immediately!
Volume adjusted at the headphone
socket may be too high.
Sound is slightly noisy ... Transmitter is not positioned in
optimum way or connectors are not
secured tightly; reception is obstructed.
Price to rent Full Sennheiser price list Compare to SET810