The BSS FDS360 is an industry standard electronic crossover unit. It can be configured as either 2 way stereo or 3 way or 4 way mono. A choice of popular frequencies is available, selected by plug-in frequency cards.

Front panel adjustment of output, phase, mute for each band. Separate indicator LED displays show output level, compression, system configuration, mutes & mono summing of low frequency.

Variable limiters on each output band, set by switches on rear panel.

Price to rent    

INPUT IMPEDANCE:     10KOhm, electronically balanced
THROUGH GAIN:          0dB standard. Optional +10dB to order
INPUT FILTERS:           24dB/oct 30Hz subsonic filter
INPUT CONNECTOR:    XLR3. Wired as pin 1 o/c, pin 2 cold, pin 3 hot
OUTPUT:                       50 milliohm current limited source to drive 600 ohm load.
MAX OUTPUT LEVEL:   +20dBm
OUTPUT CONNECTOR: XLR3. Wired as pin1 earth, pin 2 earth, pin 3 hot.
FILTERS:                       24dB/octave Linkwitz-Riley as standard.
PHASE:                        Continuously adjustable 0-180 deg. at corner frequency.
                                   Additional 180 degree using the polarity switch.
LIMITER RANGE:         0.5db steps -10dBv to -5dBv to -11dBv moveable jumper link.
NOISE:                         -85dBm 20Hz -20kHz unweighted.
DISTORTION:                less than 0.05%THD up to +20dBm limiter cancelled.
                                   Typically 0.005% THD +6dB output.
INSERTION POINTS:    Channel sends. Output impedance 100 Ohm. Max load 10K
                                   Ohm at +20dBv. Band returns. Input impedance 10KOhm.
                                   Max level +20dBv unbalanced.
ELECTRICAL SUPPLY: Switched 110-220V +10%-20% at 50/60Hz.
                                    Power supply is designed with extended low-voltage
                                    tolerance to meet road show requirements.
SIZE:                             482 x 44 x 228mm (19in x 1¾in x 9ins) overall.
WEIGHT:                       4.5kg packed.