Specifications:
Nominal impedance:            4 Ohms
Power requirements:           15 Watts (minimum) to 100 Watts (maximum) per channel
Dimensions:
Acoustimass module: 19.2 x 32.1 x 51.3mm
Cube arrays:             18.7 x 9.2 x 11.7mm
Weight:                              15kg

Driver complement:
Acoustimass bass module: Two 6" (15.2cm) low frequency drivers
Cube arrays: Four 2.5" (6.4cm) magnetically shielded, wide range drivers

GB Audio also hire out a range of special mounting hardware for attaching AM5s to pillars, walls, beams, RSJ, mic stands, etc.

Compatible wall brackets (steel with pan & tilt) available to purchase: SWB001 Very similar to the original, but obsolete, Bose bracket.

Price to rent

Bose Acoustimass AM-5 Series I

Features:
Direct/Reflecting ® cube array speaker design (shown left)
Acoustimass (TM) bass module speaker system (not shown)
Variable high frequency control
Automatic protection circuitry

Bose Acoustimass speaker technology revolutionized three-piece speaker design, allowing placement flexibility for the bass unit throughout the listening area. The low-frequency speaker drivers are located between separate acoustic compression chambers inside a patented Bose Acoustimass module. As each speaker cone moves, it excites air in the chambers. Trapped in the chamber, this air acts as an acoustic spring, which interacts with the air in the port to produce more low-frequency sound with less power.

Check our free maintenance VIDEO TUTORIALS