GB Audio. Scotland's sound system design company - hire, sale, design and installation service. News, free technical information library, rental inventory, equipment datasheets, special offers, reviews, recent events. Buy or rent; amplifier, digital / analogue tape recording, loudspeaker, effects / dynamic processor, microphone, radio mic, mixer, backline, drums, percussion, congas, stage piano, keyboard. Theatre, concert, festival, conference, fashion show, outdoor events - Edinburgh, Scotland, UK gblogo small.jpg (5802 bytes) BOSE 802C

DATA
SHEET

Production: Obsolete
Hire stock: No
New stock: No
Used stock: Yes
 Go Back one page

BOSE 802C SYSTEM CONTROLLER

The 802C Series II systems controller is a single-rack sized device. It is capable of providing crossover functions, active electronic equalization, and dual channel signal processing for both the 802 Series II loudspeakers and the 502 Acoustimass tm enclosure. It features -10/+4dB-V input sensitivity switches, all-balanced inputs and outputs, -18/+3dB bass level control, and a bass mono sum switch. It also provides automatic output muting on turn-off, and a secure rear-panel operating mode switch.


Specifications:
Input Connections: (per channel)
One (1) balanced female XLR connector
One (1) unbalanced 1/4" phone jack
Output Connections: (per channel)
Two (2) 1/4" phone jacks per channel
(outputs used depend upon mode selected)
Input Impedance: Balanced input, 4kΩ
Unbalanced input, 42kΩ
Electronic Crossover Frequency: 180Hz (bi-amplified mode only)
Maximum Output Level: 4 Volts (+12dB into 600Ω, 50Hz-16kHz)
Total Harmonic Distortion: Less than .02% at 1 Volt (0dB)
Less than .2% at 8 Volts (18dB)
Output Noise: Less than 20uV (-9dBV) A-weighted
Power Requirements: 120 Vac, 50-60Hz, 3.5 Watts
220 Vac, 50-60Hz, (European)
Dimensions: 44 x 254 x 127 mm
Weight: 0.895kg

Bose 802 acoustimas crossover EQ controller module

Bose 802 acoustimas crossover EQ controller module

Main features
  • Automatic protection circuitry
  • built in preset active crossover
  • built in preset active equaliser
  • can be used passive with 802 or 402 full range speakers
  • can be used active (bi-amplified) with 802 or 402 plus 302 bass speakers

 

Price to buy

top / Home / Dry Hire / System Hire / Sales / Accessories / A-Z / Installation / News / Reference Library / Clinic / Contact